Products
STRUCTURALS: | ||||
Angle | Channel, bar size | Floor Grating | Perforated angle, galvanized | |
Angle, offset | Channel, structural | Reinforcing rod | ||
I-Beam (S Beam) | Channel, ship & car (MC Channel) | Tee-bar | ||
Junior Beam (M beam, Light beam) | Channel, stair stringer (Junior Channel) | |||
Wide flange Beam (W & WF beams) | Expanded sheet, flattened |
|||
Expanded sheet, raised |
||||
Bars: | ||||
Hot Rolled:
|
Angle | Half-oval | Round | |
Angle, Offset | Half-round | Square | ||
Flat | ||||
Cold Formed:
|
Flat | Round | Shaft, turned, ground & polished | |
Hexagonal | Round, metric | Shaft, drawn, ground & polished | ||
Square | ||||
Tubing & Pipe: | ||||
Tube, CD seamless | Tube, hydraulic cylinder | Pipe, rectangular structural | Pipe, Seamless | |
Tube, DOM | Tube, hydraulic fluid line | Pipe, welded | ||
Tube, HR seamless | Tube, square structural | Pipe, welded, galvanized | ||
Plate & Sheet: | ||||
HR, Plate | HR, Sheet | Sheet, galvanized | ||
HR, Plate, abrasion resistant | HR, Sheet, pickled & oiled | Sheet, perforated | Floor Grating | |
Floor Plate | CR, Sheet | Expanded Sheet, raised | Bar Grating | |
Expanded Sheet, flattened | ||||
Alloy: | ||||
Plates | Round | Tubing | ||
Aluminum: | ||||
Sheet | Expanded sheet, flattened | Plate | Round | |
Expanded sheet, raised | Perforated sheet | Floor plate | Hexagonal | |
Flat | Channel | Tube, square | Tube, round | |
Angle | I-beam | Tube, rectangular | ||
Angle, offset | Tee-bar | Pipe | ||
Stainless Steel: | ||||
Sheet | Round | Half-round | Tube, round, welded | |
Expanded sheet, raised | Angle | Flat | Tube, round, welded & polished | |
Expanded sheet, flattened | Hexagonal | Pipe | Tube, rectangular | |
Perforated sheet | Square | Tube, round, seamless | Tube, square | |
Wire mesh | Plate | |||
Monel: | ||||
Round | ||||
Tube | ||||
Copper: | ||||
Sheet | Round | Flat | ||
Plate | Square | |||
Brass: | ||||
Sheet | Hexagon | Half-Oval | Angle | |
Plate | Square | Flat | Tube, Round | |
Round | ||||
Bronze: | ||||
Sheet | Round | Cored bars | Plate, wear | |
Plate | Angle, architectural | |||
Processes: | ||||
Plate Shearing: | Circle Shearing: | Structural Shearing: | Saw Cutting: | |
mild steel: 1/2” x 168” | 6” to 78” diameter | angles: 6” x 6” x 1/12” | Rounds: to 10″ | |
most aluminum alloys: 3/4” x 168” | mild steel: 10 ga. | channels: to 6” (10.5#) | Flats: to 16″ x 18″ | |
most stainless alloys: 3/8”x 168” | most aluminum: 3/16” | |||
copper 5/8” x 168” | most stainless: 12 ga. | |||
expanded or woven steel: 3/8” x 168” | ||||
Abrasive Cutting: | Flame Cutting: | Plasma Cutting: | ||
Tubes: to 6″ O.D. | steel to 10″ thick | Mild 3" MS | ||
Rounds: to 16″ | Circle & Line Cutting | Stainless Steel 1 3/4" | ||
Squares: to 3″ | (bevel cut avail.): unlimited | Aluminum 3" | ||
Angles: to 5″ x 5″ x 5/8″ | Shape Cutting: submit pattern | |||
Channels: to 6″ | ||||
I-beam: to 6″ | ||||